100% first time pass rate for API 510/570/653 in 2020! Not bad considering all courses were presented over Zoom.
So good that we now offer a Zoom option for all classroom courses. Think of that – no travel, no accommodation, no masks!
Uncertainty around CV19 travel restrictions has prompted us to change courses over the next 2 months to virtual classroom via Zoom. Given this ‘new normal’ we are giving the option to attend any of our courses over Zoom until the end of the year.
If you are remote from the course location and would still like to attend it is now possible! Just get in touch to discuss your options.
In order to cope with excess demand and the increased social distancing required for CV19, AICIP have changed their examination dates for the latter part of 2020.
The new dates are spread through October 2020, best to see the dates and see if they still suit. Scroll down 3/4 of the way on this page to see the new dates.
Off the back of the success of our ASME Level 1 eLearning course, our ASME Level 2 Plant Inspector course is now available as eLearning. The same topics are presented as self-directed content without any classroom requirements.
See our ASME Level 2 page to ensure that you fulfill the criteria and to book.
In addition to our virtual classroom offering of the ASME Level 1 course, it is now also available as a fully self-directed eLearning course!
The eLearning does away with any classroom component and the entire content is available though our online Learning Management System (LMS). Students are able to work through the lessons and questions at their own pace while working to their own schedule.
Once the modules are complete the examination is taken online through a secure and monitored examination site. It is perfect for those wanting to gain extra training and knowledge while under lockdown or uncertain work rotations.
See the ASME L1 page for details.
Travel bans within Australia are set to continue for the mid-term. In order to accommodate our students booked on courses through June and July we will now be offering our ASME Plant Inspector Level 1 and Level 2 courses fully online as virtual classroom though video conferencing. The examinations will be run online as a part of the course.
If you are interested in making the most of this opportunity please view our ASME Level 1 and ASME Level 2 pages.
We will continue to monitor the situation and review offering our API and/or AICIP courses by virtual classroom if the need arises.
In response to a growing number of enquiries we have added a course specifically for the inspection of low-risk pressure plant.
Australian legislation and regional regulators require personnel performing inspection on plant to be ‘competent’. For low risk plant this often means that traditional In-service Inspection Certifications such as AICIP ISI or API 510 are too detailed leaving few alternatives.
Our course ‘Inspection of Low-Risk Pressure Plant’ is designed to contribute towards a person’s competence by providing a solid training and assessment structure.
See the course details here
For those that took the time to evaluate the flaws on our Burst Test Challenge (see here,) you may be a little underwhelmed by the result.
For the 11 bar (1.1 MPa) MAWP vessel with all the defects shown in the original sheet , the vessel failed under hydrotest at 72 barG (7.2 MPag). None of the defects had any effects on the location of failure. It failed by a weep in a longitudinal direction starting from the toe of an attachment weld…nowhere near any of the longitudinal gouge defects, likely an area of local micro-structural weakness. The failure was completely unspectacular, just weeping so the pressure couldn’t be held.
Photo shows the regular distortion of the vessel… estimated from the test gauges to about 10-15% volumetric expansion…. Interesting to see the stiffening effect of the heads which had not distorted at all. A reality check here for inspectors who fail low-risk vessels because of minor corrosion.
Download the results fact sheet HERE
The Wilkinson Coutts ‘Inspection and Maintenance of Pressure Relief Devices’ course is now ASME approved. On successful completion of the course, delegates will be awarded a non-renewable certificate from the American Society of Mechanical Engineers (ASME).
To learn more see here.
If you wish to learn more about running on of these courses as in-house training for your company, please contact us.
